APC Back-UPS 500VA, AVR, IEC outlets, EU Medium - BX500CI :: BX500CI (Enterprise Computing > UPS Devices). Images for illustration purposes only. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms Provides notification of changing utility power and UPS power conditions Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. LED status indicators Quickly understand unit and power status with visual indicators. Typical backup time at half load. The amount of time that a backup energy source e. UPS - Uninterruptible Power Source can power the device for, when the backup energy source is half-loaded (50% of capacity).Typical backup time at full load. UPS - Uninterruptible Power Source can power the device for, when the backup energy source is fully loaded (100% of capacity). The voltage (V) of the battery. A measure of the charge stored by the battery. Determined by the mass of active material contained in the battery.
The amount of electric charge a battery can deliver at the rated voltage. The more electrode material contained in the cell the greater its capacity. A small cell has less capacity than a larger cell with the same chemistry, although they develop the same open-circuit voltage. Capacity is measured in units such as amp-hour A?? The type of battery in the device, e.
How long the cable is. The shape or design of the product. Low battery alarm, Overload alarm. Alarms that make a sound when they are activated (set off). The amplitude level of the undesired background noise, usually measured in decibels (db).
A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The greatest possible amount of current, which is a quantity representing the rate of flow of electric charge.The frequency (Hz) which is required to power the product. The maximum input voltage supported by the device. The minumum voltage needed by the device during operation. The power that the device can produce.
The maximum power that the device can produce. Products per master (outer) case. The minimum and maximum temperatures at which the product can be safely stored.The minimum and maximum temperatures at which the product can be safely operated. Number of output IEC jumpers. The number of sockets in the device where AC electrical power can be connected. A power plug is a 2 or 3 pinned device that is placed into an electrical socket in order to make an electrical connection. The type of outlet for AC electricity.
Weight of the packaged product. The distance from the top to the bottom of the packaging. The distance from the front to the back of the packaging. The distance from one side of the packaging to the other.Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. The measurement of the product from head to foot or from base to top. The distance from the front to the back of something. The measurement or extent of something from side to side.